Air tool cleaner and lubricant.

Cleans, lubricates, reconditions, eliminates moisture. Prevents rust and corrosion. Restores and extends life of air tools. Eliminates calcium build-up from moisture in air lines. Dissolve sludge, dirt and dust. Lubricates and protects all moving parts. Used regularly, this product will eliminate downtime and costly repairs .

USE : Air operated tools and motors, jackhammers, drills, saws and impact wrenches.Back to top

Compressor oil, Heavy Duty

Compolube is a ISO 68 oil, specially formulated to minimise wear of piston type or screw type compressors. Grades available : 32, 46, 68, 100.

TECHNICAL DATA :

• Grade ISO 68
• Viscosity SUS at 100ºF 339 (method D 2161)
• Viscosity SUS at 210ºF 47.7 (method D 2161)
• Flash point ºC 174
• Pour point ºC -18
• Anti rust test, distillate water Successful (method D 665A)
• Ash 0.01%

Multi-use coolant
Recommended for ferrous-alloys machining and non-ferrous. When a water-soluble coolant is needed. Excellent for turning, milling, drilling, threading, honing, grinding and light stamping.

TECHNICAL DATA :

• Densiyé kg/L at 15ºC 0.88
• Viscosity cSt at 40ºC 150
• Flash point ºC 215
• Emulsion look Milky
• Emulsion stability Stable (no cream)
• pH of emulsion at 5% 10.0
• Sulphur % v/v 0.14
• Recommended concentration 1:20
• Soluble oil in water
• Active fungicides yes (bactericides)

Hydraulic oil, Heavy duty

Enerlube is a ISO 32 oil, specially formulated to minimise wear of hydraulic pumps.

TECHNICAL DATA :

• Grade ISO 32
• Approved MEO
• Viscosity SUS at 100ºF 207 (method D 2161)
• Viscosity SUS at 210ºF 54.9 (method D 2161)
• Flash point ºC 220 (open vase, D97)
• Pour point ºC -40 (method D 92)
• Anti rust test, ocean water Successful (method D 665A)
• Foam, SEQ I cm 3 None

Cutting and tapping fluid

COOLANT – LUBRICANT

USE : A synthetic lubricant effective in lubricating and cooling such operations as punching, sawing, machining, cutting, tapping, boring and grinding on all steels and non-ferrous metals. Prolongs tool life. Increases production rates. Results in cooler workpiece with less tool burning. Fluid is transparent providing better visibility of work area. Can be removed with cold water or solvent.For industrial, institutional and food plant use.10

Food grade lubricant

A lubrication made of USP liquid petrolatum to provide a sanitary means of lubricating dairy and food processing equipment. Authorized N by CFIA (Canadian food Inspection Agnecy).

USE : A Sanitary Lubricant Used On : Slides, bearings, pistons and rings. Seals and pump part, pans, containers, belts, etc.
Used In : Fast service preparation, cut meat cold room packaging in supermarkets, pre-packaged meat units for franchise outlets, ice cream filling equipment, milk bottle filling equipment.

Food equipment lubricant

Odourless – Tasteless – Contains no silicones. Approved N by CFIA (Canadian food Inspection Agency).

USE : A lubrication made of UPS liquid petrolatum and propellant to provide a sanitary means of lubricating dairy and food processing equipment. A Sanitary Lubricant Used On : Slides, bearings, pistons and rings, seals and pump parts, pans, containers, etc.
Used In : Fast service preparation, cut meat cold room packaging in super-markets, pre-packaged meat units for franchise outlets, ice cream filling equipment, milk bottle filling equipment.

For industrial, institutional & food plant use.

TECHNICAL DATA : Effective –40°F(-40° C) at 250°F(120° C)

100% synthetic grease

Superior lubricant with PTFE. High performance. Liquid when sprayed rapidly turns to grease. Resist salt water. High melting point. Resist to : oxidation, chemical products, wear and extreme pressure. Withstand heavy loads and high speeds. Contains no silicone, no chlorinated solvents, no 1,1,1-trichloroethane, no hexane, no cfc’s, no chlorine which promote corrosion. Especially suited for extremely cold or hot conditions.
USE : Gears, locks, chains, cables, pistons, conveyers, screws, rollers, reels, instruments, tools, etc.For industrial, institutional & food plant use.

TECHNICAL DATA : Temperature range -54ºC at +260ºC

Compressor oil

USE : Almost any refrigeration system and particulary the lower temperature system.

TECHNICAL DATA :

• Viscosity in cSt at 40ºC 63,8
• Viscosity in cSt at 100ºC 6,7
• Viscosity SUS at 100ºF 337
• Viscosity SUS at 210ºF 49,0
• Density in kg/dm3, at 15ºC 0,9095
• Flash point in ºC 187
• Drop point in ºC -37
• Colour 0,5
• Flocculation point in ºC -48
• Dielectric rigidity in kV 35+
• Aniline point in ºC 88
• Sealed tube, % of R-22 0,30 (14 days)Back to top

First quality hydraulic oil

Excellent to minimise parts wear. Contains special additives for an excellent stability to oxidation and protection against foaming. Offer a better filtration particuraly in the presence of small quantities of water.
Hydrauflow is good for the following pumps : paddle hydraulic, gears, piston, also many types of compressor, speed boxes, and where an antiwear is needed.

This oil meets the following specification :

• Abex Denison HFO, HF-2, T6C, T5D-42
• Cincinnati Milacron P68, P69 et P70
• Rexnord (Racine) Paddle pump test.
• Vickers Inc. M2950-S, 5VQ25A.
• I-286-S
• F00.01
  Allison C-4 Hydraulic system only (ISO 32)
• (HPAW) Grade Code
• Availability :
  • 10 K-980
  • 15 K-981
  • 22 K-982
  • 32 K-997
  • 46 K-992
  • 68 K-983
  • 100 K-984
  • 150 K-985
  • 220 K-999

Synthetic hydraulic oil

A first quality oil formulated with polyalphaolefin (PAO) and with synthetic bases (diester as adipate or sebaccate). Excellent stability to oxidation, high intrinsic viscosity index and a good pour point. Better filtration in the presence of small quantities of water. Contain no detergent.

Hydrauflow is good for the following pumps : paddle hydraulic, gears, piston, also many types of compressor, speed boxes, and where an antiwear is needed. Recommended for exterior operation at very low temperature.
Grade (ISO) Code Availability :

• 5 K-970
• 22 K-971
• 32 K-972
• 150 K-974

Gear oil food grade

KARA FG gear oils are first grade lead-free industrial oils. The additives provide an excellent extreme pressure, oxidation and anti-foam protections to meet the highest standards in the food industry. Avoid contamination of food in the use and storage of this product. Only use sufficient product per application to achieve desired results. (n1) from the CFIA (Canadian Food Inspection Agency).

KARA FG gear oils produce excellent results in all enclosed gears (worm, helical, bevel and spur) operating under normal or heavy shock-loading conditions. For use in food processing plant and/or industrial application.

Availability : Grade EP 68, 100, 150, 220, 320, 460, 680.

Synthetic gear oil food grade

KARA FG synthetic gear high performance oils containing selected additives to offer anti-wear, extreme pressure and oxidation. Oil has non odour and no taste and offer a high viscosity index. Do not add directly to the food. Only use the amount necessary to achieve the technical effect. Remove any excess lubricants from food contact surfaces. To be used in keeping with food manufacturing practices (GMPs).

KARA FG synthetic gear oils produce excellent results in all enclosed gears. The “n” approval from the CFIA (Canadian Food Inspection Agency), allow the use of KARA FG synthetic oil where there is a potential for incidental food contact. For use in food processing plant and/or industrial application.

Availability : EP 220, EP 460.

Food grade hydraulic oil

A blend of high viscosity and high quality oils. Additives are added to provide excellent anti-wear, anti-oxidation, anti-rust and anti-foam protection to meet the highest standards in the food industry. The oil should not be added to the food. Avoid food contamination during application and storage (n2) from the CFIA (Canadian Food Inspection Agency). KARA FG hydraulic fluids are recommended for use in all hydraulic systems and can also be used in circulating systems and could be used for bearings and gears under normal loads where extreme pressure additives are not required. For use in food processing plant and/or industrial application.
Availability : Grade ISO 22, 32, 46, 68, 100, 150.

Food grade synthetic compressor oil

The synthetic compressor oil is a first quality oil, formulated with Polyalphaolefin (PAO). The synthetic bases offer an excellent stability to oxidation, a high intrinsic viscosity index and a good pour point. It offer better filtration assuring prolonged maintenance intervals. Does not contain detergent.

Avoid contamination of food in the use and storage of this product. Only use sufficient product per application to achieve desired results. (n1) from the CFIA (Canadian Food Inspection Agency). Excellent lubricants to be used in HACCP (hazard analysis and critical control point) plants.

Grade Code Availability :32 K-116, 46 K-117, 68 K-118, 100 K-119

Food grade chain oil

Chain oils are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery. Chain oils may be applied at temperatures up to 200ºC. However, at temperatures above 150ºC, equipment should be re-oiled more frequently.
Approved for incidental food contacts applications but not to be added to the foods (n). An excellent product to be used in HACCP food plants and other industrial application.

Availability : Light code K-311, Heavy code K-312

Food grade compressor lubricants

KARA PURE FG compressor lubricants may be safely used to lubricate air compressors and vacuum pumps used in food industries. Approved for incidental food contacts applications (n) but not to be added to the foods. An excellent product to be used in HACCP food plants and other industrial application.

Grade Code Availability : 32 K-313, 46 K-314, 68 K-315, 100 K-316

Food grade gear oil

Gears oils produce excellent results in all enclosed gears (worm, bevel and spur, helical) operating under normal or heavy shock-loading conditions. Gear oils can also be used in bearings and chain drives.
Approved for incidental food contacts applications (n) but not to be added to the foods. An excellent product to be used in HACCP food plants and other industrial application.

Grade Code Availability : EP100 K-304, EP150 K-305, EP220 K-306, EP320 K-307, EP460 K-308

DescriptionFood grade hydraulic oil

Hydraulic oil produce excellent results in high pressure systems including applications operating at more than 1000 psi (7000 kPa).
Approved for incidental food contacts applications (n) but not to be added to the foods. However the oil should not be added to the food. Avoid food contamination during application and storage (n2). An excellent product to be used in HACCP food plants and other industrial application.

Grade Code Availability : 32 K-300, 46 K-301, 68 K-302, 100 K-303

Food grade white mineral oil

Rust protection or corrosion for knifes or table of cutting for the preparation of foods. Can also be used in the following applications : coating for fruits, release agents for moulds and bakery pans, moisture resistant coatings, cleaning agent for stainless steel.

KARA PURE FG WO oils are authorized as lubricants with incidental food contact and (n), (n3) authorized by the Canadian Food Inspection Agency, as protective oils. An excellent product to be used in HACCP food plants and other industrial application.

Grade Code Availability : WO 15 K-321, WO 35 K-322, WO 90 K-323

Food grade oil for pneumatic system

KARA PURE FG oil for pneumatic system produce excellent results in pneumatic system including applications operating at more than 1000 psi (7000 kPa). Can also be use for suction pump.
Approved for incidental food contacts applications but not to be added to the foods (n). An excellent product to be used in HACCP food plants and other industrial application.

Grade Code Availability : 32 K-344, 46 K-345, 68 K-346, 100 K-347

Universal lubricant : odourless, colourless

The all around product, contains no silicone. Resists water wash outs and leaves a film that prevents rust and corrosion.

USE : Lubricates : dampers, chains, cables, rollers, conveyors, gears, slides, pistons, etc.

TECHNICAL DATA : Temperature range -40ºC to +120ºC

Sliders/ways oil

Lubrex 68 recommended to lubricate sliders, ways and trolleys and everywhere an adhesive and anti-corrosion lubricant with extreme-pressure proprieties is required.

TECHNICAL DATA :

• Grade 68
• Viscosity cSt at 40ºC 69.1
• cSt at 100ºC 9.12
• Viscosity indication 108
• Flash point ºC 205
• Drop point ºC -27
• Corrosion with copper blade 1A
• Timken EP test (kg) 16
• Jerk rate 0.85

Gear oil 80W90

LUBRICO is recommended for : differentials, simple manual transmissions and any type of industrial gear box, enclosed gears of the spur type, hypoid, spiral bevel, worm herring bone, helical, planetary and combinations of various gear types.

Gear oil 85W140

LUBRICO-XL is recommended for : differentials, simple manual transmissions and any type of industrial gear box, enclosed gears of the spur type, hypoid, spiral bevel, worm herring bone, helical, planetary and combinations of various gear types.

Spray mist lubricant

Ideal for grinding, knife sharpening, glasses polishing where mixes of 1: 100 are required to avoid to full the stones. Can also be used for soft or hard metals requiring proportions 1 :10 to 1 :20.

TECHNICAL DATA :

• Density kg/L at 15ºC 0.95
• Viscosity cSt at 40ºC 75
• Flash point ºC N/A
• pH 9.0 – 9.5
• Miscibility with water Complete
• Antimist properties Yes
• Refractometer index 50% V/V water 20.0

Penetrating lubricant with Moly and PTFE.

Loosens nuts & bolts – Prevents rust – Never dries – Contains additives to protect parts against harmful effects of moisture and corrosion

USE : Wherever a mechanical assist is needed, Loosens frozen nuts and bolts. Lubricates moving parts. Prevents corona arcing. Loosens scale and dirt. For industrial, institutional and food plant use. Accepted (n1) by the CFIA (Canadian Food Inspection Agency).

Screw compressor oil

ROTALUBE is the lubricate for screw compressor. Recommended all year round for all air compressor, gear and industrial speed reducer (screw).

TECHNICAL DATA :

• Relative density, 15ºC 0.864
• Density API. 60ºF 32.1
• Flash point ºC, 207.0 (Cleveland at open vase)
• Drop point ºC -42
• Viscosity at -40ºF, cP 25500
• cSt at 40ºC 38.80
• cSt at 100ºC 7.66
• Viscosity indication 185.0
• Colour Amber

Silicone dry lubricant

Prevents sticking – Mould release agent – Heat resistant – Non-chlorinated – 35 000 volt dielectric. Prevents jamming and production slowdown. Safe on all surfaces and fabrics. Dries fast and not affected by water and oils.

USE : For industrial, institutional, food plants.

TECHNICAL DATA :Temperature range -40ºC at +232ºC, (-40ºF at +450ºF)

Chain and cable lubricant, fortified with Moly.

Lubricates & protects. Forms protective shield. Lubricates up to 180ºC (350ºF). The protective Moly shield gives a minimum lubrication at higher temperature.

USE : For industrial, institutional and food plant use.

Chain and cable lubricant

Ensures a good penetration of the cable and prevents premature wear. Formulated with highly refined mineral oil and selected antifriction additives.

TECHNICAL DATA : Density at 15ºC kg/l 0.86Viscosity cSt at 40ºC 20

Silicone dry lubricant, Food grade

Prevents sticking – Authorized (n) by CFIA – Non-chlorinated – 35 000 volt Dielectric. Prevents jamming and production slowdown. Safe on all surfaces and fabrics. Dries fast and not affected by water and oils.

USE : For industrial, institutional, food plants.

TECHNICAL DATA :Temperature range -40ºC at +232ºC (-40ºF at +450ºF)

Dry lubricant with PTFE, chemically inert, non-oily, fast drying.

Lubricant and release agent made with an extremely fine fluorotelomer powder. Features outstanding microscopic film forming properties and resists temperatures from -73ºC to +260ºC (-100ºF to +500ºF).

USE : For industrial, institutional, food plants. An odorless, stainless coating that is more slippery than silicone, graphite or oil. The dry film is not affected by most chemicals.

Food grade synthetic oil

formulated with first quality 100% pure Polyalphaolefin (PAO) synthetic base oils. Formulated to offer a superior lubrication under severe conditions subject to extremely high or low temperatures. It offers thermal stability and superior protection against oxidation, anti-wear and corrosion.

VERSA LUBE may be recommended for : bearings, gearboxes, pumps and chains.
Accepted (n) from the CFIA (Canadian Food Inspection Agency). Do not add directly to the food. Excellent lubricants to be used in HACCP (hazard analysis and critical control point) plants. For use in Food plant and other industrial use only.

Availability :Grade ISO 100, 150, 220, 320, 460, 680, 1000.