Adhesives
Cyanoacrylate glue USE : Specially designed to glue natural rubber with latex and difficult glue plastic (e.g. delrin, plastic vinyl). A limited penetrative viscosity. Very fast adhesion. |
|||||||
Cyanoacrylate glue USE : To hold wires and others uses who needed a no spread glue. The viscosity of 1500 cps., makes it easy to use and fill medium interstice. |
|||||||
Toughned epoxy For use in general structural bonding of metals, and plastics. Compatible with most composites. TECHNICAL DATA : Fixture time : 2 hours / Full cure time : 12 hours / Maximum gap fill : 0.15 inches / Shear strength :3700 psi |
|||||||
Emergency metal repair kit Seals cracks in metal. Blowholes in castings. Internal bores of pipes, valves and fitting. TECHNICAL DATA : Fixture time : 3 hours / Full cure time : 6 hours / Maximum coating thickness : 5,1 mm / Can be machined, drilled, or tapped in 3 to 6 hours. |
|||||||
Epoxy, Urethane, Hand cleanser pouchs USE : Urethane : |
|||||||
Gasket sealant Engine transmission flanges. Water pumps, Gearbox covers. Diesel engines flanges. TECHNICAL DATA : Fixture time : 1 hour / Full cure time : 24 hours / Maximum gap fill : 0,635 mm |
|||||||
Red threadlocker (high strength) Transmission and engine block studs. Fasteners on vibrating machine. Valve sets. TECHNICAL DATA : Fixture time : 20 minutes / Full cure time : 24 hours / Maximum gap fill : 0,200 mm |
|||||||
Bearing sealant Bushings in electric motors. High temperature retaining applications. For use adjacent to plastic coatings and parts. TECHNICAL DATA : Fixture time : 20 minutes / Full cure time : 16 hours / Maximum gap fill : 0,200 mm / Shear strength :3000 psi |
|||||||
RTV Silicone Gasket maker, sealant, adhesive, quality caulking. Adhesive can be use on : metal, glass, porcelain, ceramics, wood, rubber, and most paint and plastic. Chemical resistant. USE : Gasket maker, sealant, adhesive, quality caulking.For industrial, institutional and food plant use. TECHNICAL DATA : Strength 350 psi / Temperature range -65ºC to +260ºC |
|||||||
Teflon sealant Hydraulic and pneumatic fittings. Threaded pipe joints. Pipes, plugs, fuel, brake and air conditioning lines. TECHNICAL DATA : Fixture time : 2 hours / Full cure time : 16 hours / Maximum gap fill : 0,510 mm / Shear strength : 1000 psi (7 N/mm2) |
|||||||
General purpose threadlocker (medium strength) Replace lockwashers. Replace plastic insert fasteners. Replaces interference fits and jams nuts. TECHNICAL DATA : Fixture time : 20 minutes / Full cure time : 24 hours / Maximum gap fill : 0,150 mm / Shear strength :1500 psi (10.4 N/mm2) |
|||||||
Pump accelerator for Cyanoacrylate Reduces cure time all cyanoacrylates. For bonding with large gaps, porous or inactive surfaces. |
|||||||
Rubber silicone Bonding and sealing hermetically : glass, metal, ceramic, wood, resin, plastics, natural and synthetic fibres, etc. Dries to the touch in 1 hour. Becomes rubberised in 24 hours. TECHNICAL DATA : Temperature range -65ºC at +260ºC / Colour : White, clear and black |
|||||||
Gum remover COL OFF is a solvent with high evaporation rate. USE : Remove glue or gum. |